Analogue inputs: electronically balanced or unbalanced,
using female XLR connectors on flying leads.
Analogue I/O levels: +4dBu nominal (+20dBu max), or -10dBV nominal
(+6dBV max), software-selectable.
Input impedance: 24k Ohm balanced, 12k Ohm unbalanced.
Output impedance: 100 Ohm balanced, 50 Ohm unbalanced.
A-D converters: AKM
AK5394 24-bit / 32-bit float.
D-A
converters: Crystal CS4396 24-bit / 32-bit float.
Dynamic range: 116dBA (input), 117dBA (output).
Signal-to-noise ratio: 116dBA (input), 117dBA (output).
Frequency response: 20Hz to 20kHz, +0/-0.05dB at 44.1kHz.
Input THD + noise: 0.0006%, 22Hz to 22kHz.
Output THD + noise: 0.001%, 22Hz to 22kHz.
Supported
bit depths: 8, 16, 24, and 32 float.
Supported analogue sample rates: 8kHz to 200kHz with high resolution
adjustment.
Digital I/O: AES-EBU or S/PDIF, transformer-coupled, XLR connectors
on case.
Supported
digital sample rates: 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, and 192kHz.
Wordclock: in and out using XLR connectors on case.
SMPTE timecode I/O: LTC in and out using XLR connectors on case,
supporting 24, 25, 29.97, and 30 frame rates (drop and non-drop).
Sample-rate conversion: supports conversion ratios up to 3:1
on digital input, with 128dB dynamic range.
